Call Us Toll-Free
1-800-419-1130
|
|
Pay less per piece by ordering more pieces!
| Quantity | Amount |
| 150 to 249 | $9.49 |
| 250 to 999 | $8.49 |
| 1000 to 10000 | $7.99 |
|
|
Resources:
Customer Installations and Comments
Pictures of finished installations to give you ideas for your own project.
Frequently Asked Questions about Thermoform Ceiling Tiles
Details about moisture resistance, fire rating, acoustics, and more.
Installing Thermoform Tiles:
- Direct Mount Installation
Simply apply tiles directly to the ceiling or wall using an adhesive as described below. Cover the seams with decorative joint strips (ordered below).
- Installing with a 2x4 Grid or Tegular Tiles
With a 2x4 grid you can either apply the tiles directly to your 2x4 ceiling tiles or add a Grid Divider to convert your 2x4 grid into a 2x2 grid. If your existing ceiling has tegular tiles, simply flip them over and apply the ceiling skins to the back side of the tiles.
- Installing with a 2x2 Grid
Simply lay the tiles into your grid ... it's that easy!
** Important: When installing in a grid system, this tile has a design in it which makes it difficult to sit flat on the perimeter tiles (the tiles that aren't full tiles). It is helpful to order a perimeter tile for any partial tiles: Perimeter Tiles
Direct Mount Application:
Apply a 1/4" wide flat film of adhesive to the backside of the ceiling tile 1/2" inside the perimeter and another in the center area of the tile along a high relief area. A high relief area is a point on the ceiling tile that will touch the ceiling once the tile is installed.
Avoid placing large daubs of adhesive anywhere on the ceiling tile, as this may be visible through the tile. Any excess adhesive can be removed immediately with warm water or mineral spirits.
Position the ceiling tile and firmly hold it in place so that the adhesive makes good contact with the ceiling surface.
Along each side of the ceiling tile, apply three staples (or finishing nails) within 1/4" of the tile's outer edge. The close outer edge placement ensures that the staples will be covered by the decorative joint strip, which will be centered over the joint between the tiles.
If staples or finishing nails will not be used to hold the ceiling tiles in place, four 1" x 1" pieces of 3M Double Sided Mounting Tape should be applied to the center of the tile in addition to the adhesive. The tape will hold the ceiling tile in place while the adhesive sets and bonds.
Once the first ceiling tile is installed, begin placing the adjacent tiles. The second ceiling tile should be placed directly against the first. Repeat the installation process with the remaining ceiling tiles.
Material:
Thermoform tiles are made from UV Stabilized .03" thick vinyl plastic. They are designed to provide all the functionality of conventional ceiling tiles at a fraction of the weight. The feather-light construction makes them easy to install, easy to clean, stain resistant, water resistant, dust free, and resource friendly! Installation is fast and couldn't be any easier. |
Sizes & Colors:
Direct mount ceiling tiles are available in 2' x 2', and come in five colors: White, Sand, Merlot, Latte, and Black (prices vary by color).
Color Samples:
Please email colorsamples@wishihadthat.com with your address and the colors you would like to see.
Color samples come in 3” x 3” squares and are made of a thin vinyl material. These samples are intended to show color and do not reflect the thickness of the actual tile. Color samples are free, and should be delivered within 3-5 business days. For further assistance with color samples please contact us at 1-800-419-1130
Price: From $27.50 to $36.50
100 ft Decorative Grid Strip
Cover up drop ceiling grid.
MATCHES PROLITE TILES ONLY
|
Price: From $24.99 to $28.99
Hide your Grids or Joints!
Sold as bundle of 25 strips
MATCHES PROLITE TILES ONLY
| |
| 105% Best Price Guarantee |
 |
Shop with Confidence!
When you are a WishIHadThat customer you can expect to receive the best overall experience from the time you visit our site until your project is complete. Our goal is to go beyond simply satisfying you and part of that is ensuring that you are not only getting the best products for your project but also the best pricing. Full Details
See what our customers are saying about us! |
|
|
|